2PCs Rear Trunk Struts Compatible with 2005-2008 Chrysler 300 Gas Spring Charged Lift Supports Shocks Dampers PM3162, 6405, 8196247

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]

Product Description

Beneges devotes itself to automotive aftermarket, exporting kinds of aotomotive parts to global markets. We attaches much importance to products quality, strictly with raw materials selection, manufacturing process, qualified with QA and QC. Beneges strut lift supports meet the original specifications, designed easily to mount in just minutes. When replace the old supports, you just need to prepare a flat screwdriver and a torx screwdriver.

Check The Adaption Chart to Confirm The Models and Years

Extended Length [IN]: 11.71

Compressed Length [IN]: 8.01

Installation Location: Trunk

Fits Vehicles: Chrysler 300

2005-2008 | Base Sedan2005-2008 | C LWB Sedan2005-2008 | C SRT8 Sedan2005-2008 | C Sedan2005-2008 | LX Sedan2005-2008 | Limited Sedan2005-2008 | Touring LWB Sedan2005-2008 | Touring Sedan

Check The Original Installation Before Removing

Before removing the old lift supports, examine any fittings supplied to determine which components will be re-used.

Reserve them and use when installing the new supports.

Remove The Old Lift Supports

Hold the hood, rear window or hatch to avoid sudden crash when replacing the struts. Pry the iron plate on the connector with a flat screwdriver, the clip pops, then take the end out. The same method to take out the other end. If the strut with an iron plate fixed end, just screw out the nut bolts, then take the other end out.

Please don’t remove two struts at the same time, following the steps by Remove – Mount – Remove -Mount.

Mounting The New Lift Supports

Pry the iron plate on the connector with a flat screwdriver, the clip pops, then align the eyelet to the ball stud and push it in. Install the other side with the same method.

After installation, testing it to confirm the new lift supports moving smoothly.

Leak Free Sealing Technology

The sealing rings are imported from Japan, using the JSR rubber compound, high temperature resistant and oil resistant. The advantage makes it never leak off and enhances the strut’s life time.

Gas Filling Process

After sealing, the lift supports tubes will be filled with gas. Each gas filled strut will be tested again and again to ensure the piston rod run smoothly.

Advanced Spraying Treating

The heavy gauge cylinder and steel stroke are treated with multiple processings. The cylinder tubes are cold rolled and painted with epoxy paint. The stroke rods are straightly aligned, round grinded, and then galvanized and polished. They ensure our struts are high temperature resistant and never distort.

Completed Struts Lift Supports

Experiencing the finishing and testing, our gas spring supports will be packed to deliver to the world.

Wide Application of The Struts Lift Supports

Considering the different requirements, we manufacture lift supports(lift struts, dampers) that can be installed at car’s front hood, rear hood, liftgates, tailgates, rear window, trucks and hatches. Some universal lift struts with various newtons used to support cabinets, windows or bed boards.

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 16.14 x 2.2 x 1.3 inches; 9.59 ounces
Date First Available ‏ : ‎ April 8, 2018
Manufacturer ‏ : ‎ Beneges Auto Parts
ASIN ‏ : ‎ B07C1ZGS4N

【Fit Vehicles】- Chrysler 300 2005-2008 Trunk.
【Related Parameters】- Extended Length: 11.71 IN, Compressed Length: 8.01 IN.
【Advanced Process】- The Rods are straightly aligned, round grinded, and then galvanized, polished. The cylinder tubes are cold rolled and painted with epoxy paint. Multiple processing prolongs lift struts life.
【Premium Manufacturer】- Beneges is qualified manufacturer with SGS approved. All our lift supports meet ISO/TS16949 standard and OEM specifications. All our products are ONE year FREE change.
【Kind Note】- Please read description and compatibility chart before purchase and freely contact with our customer service if any question.

[ad_2]